MIL F-24669/8 Grade E Structural and constructional steels
Data updates
This material has 22 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
MIL F-24669/8 Grade E Chemical Composition
MIL-F-24669/8: 1991 / Forgings and forging stock, steel for integral steam turbine rotors
Looking for full material performance data?
Free registration required • Instant access
MIL F-24669/8 Grade E Physical Properties
Temperature
This material has 22 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
MIL F-24669/8 Grade E Heat Treatments
- Heat treatment shall be consist of quenching and tempering or normalizing and tempering. Multiple heat treatment operations are permitted and may be necessary to archive to required mechanical properties in forgings with large cross sections. Min. tempering temperatures shall be 595°C. Stress relieved with the mechanical property test samples at temperature of 27 to 55°C below the final tempering temperature. The forgings shall be held at the stress relief temperature for a period of 1h per inch of the forging’s maximum radial thickness.
MIL F-24669/8 Grade E Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
MIL F-24669/8 Grade E International Equivalent Materials
Showing 1 of 1 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 1 international equivalents?
See all 1 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 1Cross References
- 12Composition
- 5Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers