MIL S-46119C Structural and constructional steels

Material group: Ferrous Alloys / Structural and constructional steels

Country / Standard: United States / MIL

Data updates

Latest Update: 2016-01

Total number of updates: 1

Update History

This material has 23 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

MIL S-46119C Physical Properties

Temperature

0 - 30°C

PROPERTY / VALUE

Modulus of Elasticity

190 — 210 GPa

Unlock full details

Density

7.67 — 7.86 kg/dm³

Unlock full details

Poisson Coefficient

0.27 — 0.3

Unlock full details

This material has 23 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

MIL S-46119C Heat Treatments

Shall be performed on the whole forging, never on a portion only and shall consist as a min. of normalizing, austenitizing, agitated liquid quenching and tempering. Unless otherwise permitted by the procuring contracting officer forgings shall be quenched vertically. Forgings for tubes with 57mm finished bore diameter and larger shall be rough bored and rough turned to the applicable forging drawing dimensions before heating and quenching. Unless otherwise allowed the liquid coolant shall pass freely through the bore during the quenching process. Forging for tubes with finished bore diameter under 57mm may be quenched solid at the option of the contractor. Tempering shall immediately follow quenching and shall consist of heating the entire forging to a temperature not less than 538°C for YS ranges up to and including 170000 PSI not less than 50°C for YS in the range over 170000 up to including 190000 psi and holding at the temperature for a time appropriate to the thickness. Whenever differential tempering is employed or whenever forgings are retempered only temperatures of 538°C or 510°C minimum are required, as noted unless otherwise allowed by the procuring contracting officer; Straightening: The bow extends may be removed by cold strainghtening after the final tempering treatment. If any bow exceeds 0.005 inch it shall be removed by not straingtening. The min. temperature of the forging during the hot straightening operation is 316°C. The max temp. the forging can be heated to prior to the straightening operation is the final tempering temperature minus 50°F (28°C).

MIL S-46119C Mechanical Properties

Temperature

≤ 0°C 0 - 30°C

PROPERTY / VALUE

Yield Strength, Rp0.2

827 — 1310 MPa

Unlock full details

Reduction of Area

≥ 35 %

Unlock full details

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

Optimize material selection for your application - Book A Demo

Looking to compare materials and make better decisions?

Access reliable material data, compare options, and make better decisions faster.

With Total Materia, you can:

Compare materials based on real engineering data

Find equivalent materials across standards

Evaluate performance for your specific conditions

Check compliance with global regulations

See how this works for your specific application

Take a Guided Tour

-Cross References

-Composition
19Mechanical Properties
3Physical Properties
1Heat Treatment
-Metallography
-Machinability

-Stress-Strain
-Formability
-Fatigue
-Fracture
-Creep

-Joints
-Coatings
-Dimensions
-Tribology

-Corrosion
-Ageing
-Weatherability
-Irradiation

-Total Suppliers