AFCEN Z2 CND 18.12 Stainless steels
Data updates
This material has 400 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
AFCEN Z2 CND 18.12 Chemical Composition
M 3301: RCC-M II: 2024 / Class 1, 2 and 3 austenitic stainless steel forgings and drop forgings
Looking for full material performance data?
Free registration required • Instant access
AFCEN Z2 CND 18.12 Physical Properties
Temperature
This material has 400 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
AFCEN Z2 CND 18.12 Heat Treatments
- Final heat treatment for mechanical properties shall consist of solution heat treatment at a temperature between 1050°C and 1150°C.
- Final heat treatment for mechanical properties shall consist of solution heat treatment at a temperature between 1050°C and 1150°C.
There are three distinct cases:
a) Plates ≤ 3 mm thick finished by cold rolling
These plates are delivered after cold-rolling, either solution heat-treated, pickled and passivated, or solution heat-treated, pickled, passivated and work-hardened. Sheets and strip may be delivered on spools.
b) Plates > 3 mm thick finished by cold-rolling
These plates shall be delivered after cold-rolling. They shall be solution heat treated pickled and passivated. If work-hardening treatment is necessary, it shall be subject to approval.
c) Plates > 3 mm thick hot-rolled
These plates shall be delivered after hot-rolling. They shall be solution heat treated, pickled and passivated.
AFCEN Z2 CND 18.12 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
AFCEN Z2 CND 18.12 International Equivalent Materials
Showing 4 of 52 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 52 international equivalents?
See all 52 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 52Cross References
- 88Composition
- 198Mechanical Properties
- 3Physical Properties
- 8Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 50Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 1Total Suppliers