PROPRIETARY CRUCIBLE AIRKOOL Tool steels
Data updates
This material has 40 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CRUCIBLE AIRKOOL Chemical Composition
Crucible Industries LLC., Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY CRUCIBLE AIRKOOL Physical Properties
Temperature
This material has 40 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CRUCIBLE AIRKOOL Heat Treatments
- Annealed: Heat to 1600°F (870°C), hold 2 hours, slow cool 50°F (28°C) per hour to 1200°F (650°C) then air cool. OR heat to 1600°F (870°C), hold 2 hrs., cool to 1400°F (760°C) hold 6 hrs. then air cool. Stress relieved: Annealed Parts: Heat to 1200-1250°F (650-675°C), hold 2 hours, then cool in still air. Hardened Parts: Heat to 25-50°F (15-25°C) below the original tempering temperature, hold 2 hours, then cool in still air. Hardened: Preheat: Heat to 1100-1250°F (595-675°C), equalize, then to 1350-1450°F (730-790°C), equalize. Austenitize: 1750-1800°F (955-980°C), Hold time at temperature 30-45 minutes. Quench: Air or positive pressure quench (2 bar minimum) to below 150°F (65°C). Temper: 400-1000°F (205-540°C). Temper 2 hours minimum each time or at least 1 hour per inch (25mm) of thickness. Double Temper. Cool to room temperature in between tempers.
PROPRIETARY CRUCIBLE AIRKOOL Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY CRUCIBLE AIRKOOL International Equivalent Materials
Showing 2 of 3 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 3 international equivalents?
See all 3 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 3Cross References
- 5Composition
- 18Mechanical Properties
- 10Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 3Total Suppliers