BDS MIM-4605-1310H Structural and constructional steels
Data updates
This material has 39 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
BDS MIM-4605-1310H Chemical Composition
EN ISO 22068: 2014 / Sintered-metal injection-moulded materials - Specifications
Looking for full material performance data?
Free registration required • Instant access
BDS MIM-4605-1310H Physical Properties
Temperature
This material has 39 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
BDS MIM-4605-1310H Heat Treatments
- Ferrous MIM parts which contain at least 0.3% carbon can be quench-hardened and tempered. Tempering is required after quenching for stress relief and optimization of strength and toughness. These two properties can be varied over a wide range using different tempering temperatures. The hardness level obtained after heat treatment shall be stated for quenched and tempered steels. Case hardening (carburizing or carbo-nitriding) can also be applied to ferrous MIM materials with less than 0.3% carbon to obtain high surface hardness.
BDS MIM-4605-1310H Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
BDS MIM-4605-1310H International Equivalent Materials
Showing 15 of 22 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 22 international equivalents?
See all 22 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 22Cross References
- 7Composition
- 5Mechanical Properties
- 4Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers