MIM-52100-630 (European Union / EN) Material Properties

Material group: Ferrous Alloys / Structural and constructional steels
Country/Standard: European Union / EN

Data updates

Latest Update: 2019-05
Total number of updates: 2
Update History:
2015-05

Mechanical Properties

Temperature

0 - 30°C
PROPERTY / VALUE
Yield Strength, Rp0.2 630 MPa view details
Tensile Strength 950 MPa view details
Elongation, A 5 % view details
Rockwell Hardness (HR) val1
Full data access requires a free trial. Sign Up Free
view details
Vickers Hardness (HV) val1
Full data access requires a free trial. Sign Up Free
view details
Yield Strength, Rp0.2 91.4 ksi view details
Tensile Strength 137.8 ksi view details
Elongation, A 5 % view details
Rockwell Hardness (HR) val1
Full data access requires a free trial. Sign Up Free
view details
Vickers Hardness (HV) val1
Full data access requires a free trial. Sign Up Free
view details

Physical Properties

Temperature

0 - 30°C
PROPERTY / VALUE
Modulus of Elasticity 190 — 210 GPa view details
Density 7.4 — 7.86 kg/dm³ view details
Poisson Coefficient 0.27 — 0.3 view details
Modulus of Elasticity 27.6 E+03 — 30.5 E+03 ksi view details
Density 0.267 — 0.284 lb/in³ view details
Poisson Coefficient 0.27 — 0.3 view details

Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
0.8 – 1.05
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
1.35 – 1.65
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Fe
VALUE
Balance
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mn
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Other total
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
CRITERIA
Si
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-21-3

EN ISO 22068: 2014 / Sintered-metal injection-moulded materials - Specifications

Heat Treatments

  • Ferrous MIM parts which contain at least 0.3% carbon can be quench-hardened and tempered. Tempering is required after quenching for stress relief and optimization of strength and toughness. These two properties can be varied over a wide range using different tempering temperatures. The hardness level obtained after heat treatment shall be stated for quenched and tempered steels. Case hardening (carburizing or carbo-nitriding) can also be applied to ferrous MIM materials with less than 0.3% carbon to obtain high surface hardness.