NMX TP 321H Stainless steels
Data updates
This material has 427 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
NMX TP 321H Chemical Composition
NMX-B-185: 1988 / Seamless and welded austenitic stainless steel pipe
Looking for full material performance data?
Free registration required • Instant access
NMX TP 321H Physical Properties
Temperature
This material has 427 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
NMX TP 321H Heat Treatments
- If cold working is involved in processing, the minimum solution-treating temperature shall be 1100°C. If the material is hot-rolled, the minimum solution-treating temperature shall be 1050°C. A solution annealing temperature above 1065°C may impair the resistance to the inter-granular corrosion after subsequent exposure to sensitizing conditions.
- Solution treated at minimum 1100°C. Solution annealing at a temperature above 1065°C can decrease resistance to intergranular corrosion. After annealing of solution must be given a stabilization heat treatment at a lower temperature at which the heat treatment use initial solution annealing. The heat treatment temperature stabilization must be by agreement between manufacturer and purchaser.
NMX TP 321H Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
NMX TP 321H International Equivalent Materials
Showing 6 of 360 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 360 international equivalents?
See all 360 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 360Cross References
- 32Composition
- 27Mechanical Properties
- 3Physical Properties
- 3Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers