NMX CB7 Cu-1 Cast steels

Material group: Ferrous Alloys / Cast steels
Country / Standard: Mexico / NMX

Data updates

Latest Update: 2021-04
Total number of updates: 2
Update History
2015-02

This material has 141 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

NMX CB7 Cu-1 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
≤ 0.07
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
15.50 – 17.70
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
2.50 – 3.20
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
N
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7727-37-9; 17778-88-0
CRITERIA
Nb
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-03-1
CRITERIA
Ni
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-02-0
CRITERIA
P
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3

NMX-B-088: 1987 / Steel Castings, Stainless, Precipitation Hardening

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

NMX CB7 Cu-1 Heat Treatments

  • All castings must be given a solution treatment, unless it is ordered in the annealed condition by s solution, should be precipitation hardened. The annealing heat treatment by solution should consist of heating parts and the test material at 1323°K (1050°C) + 30°K (30°C); maintain this temperature 1.2 min/mm section, but not less than 30 minutes, and air cool below 303°K (30°C).The temperature used for precipitation hardening should be kept within the range of + 15°K (+ 15°C). Where a minimum Nb content is specified, the minimum temperature for precipitation hardening should be 768°K (495°C). H900: Precipitation hardening: T = 480°C for 110 min. (cooling in air); H925: Precipitation hardening: T = 495°C for 110 min. (cooling in air); H1025: Precipitation hardening: T = 550°C for 240 min. (cooling in air); H1075: Precipitation hardening: T = 580°C for 240 min. (cooling in air); H1100: Precipitation hardening: T = 595°C for 240 min. (cooling in air); H1150: Precipitation hardening: T = 620°C for 240 min. (cooling in air); H1150M: I- Precipitation hardening: T = 760°C for 60 min. (cooling in air); II - Precipitation hardening: T = 620°C for 240 min. (cooling in air); H1150DBL: Precipitation hardening: T = 620°C for 240 min. (cooling in air).

NMX CB7 Cu-1 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 863 MPa
Unlock full details
Full data available with free access View Complete Material Data
Brinell Hardness (HB)
269 — 310
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
≥ 5 %
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

NMX CB7 Cu-1 International Equivalent Materials

Showing 15 of 56 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
A 747 CB7Cu-1
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
SA-747 CB7Cu-1
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
J92180
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A747 CB7Cu-1
STANDARD
ACI
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
SA-747 Type 17-4
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
Z 5 CNU 16-4 M
STANDARD
AFNOR NF
COUNTRY / PRODUCER
France
EQUIVALENCE CATEGORY
Implicit
MATERIAL
GX5CrNiCu16-4
STANDARD
AFNOR NF
COUNTRY / PRODUCER
France
EQUIVALENCE CATEGORY
Implicit
MATERIAL
1.4540
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Implicit
MATERIAL
GX 4 CrNiCuNb 16-4
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Implicit
MATERIAL
1.4525
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Implicit
MATERIAL
GX5CrNiCu16-4
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Implicit
MATERIAL
1.4525
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Implicit
MATERIAL
ZG0Cr18Ni12Mo2Ti
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Implicit
MATERIAL
SCS 24
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Implicit
MATERIAL
SSC 24
STANDARD
KS
COUNTRY / PRODUCER
Korea
EQUIVALENCE CATEGORY
Implicit

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 56 international equivalents?

See all 56 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 56Cross References
  • 10Composition
  • 26Mechanical Properties
  • -Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 48Total Suppliers