ISO 4571-316-35-I Stainless steels
Material group:
Ferrous Alloys / Stainless steels
Country / Standard:
International / ISO
Data updates
Latest Update: 2024-10
Total number of updates: 7
Update History
2023-12
2019-06
2018-10
2014-12
2014-10
2014-09
This material has 882 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
View Complete Material Data ›
Free registration required • Instant access
Free registration required • Instant access
ISO 4571-316-35-I Chemical Composition
CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
≤ 0.08
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
16.5000 – 18.5000
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Mn
VALUE
≤ 2.0000
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
Ni
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7440-02-0
CRITERIA
P
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6
ISO 15510: 2014 / Stainless steels -- Chemical composition
Looking for full material performance data?
View Complete Material Data ›
Free registration required • Instant access
Free registration required • Instant access
ISO 4571-316-35-I Physical Properties
Temperature
Modulus of Elasticity
190 — 215
GPa
Unlock full details
Full data available with free access
View Complete Material Data
Thermal Conductivity
Unlock full details
Full data available with free access
View Complete Material Data
Electrical Resistivity
Unlock full details
Full data available with free access
View Complete Material Data
Density
Unlock full details
Full data available with free access
View Complete Material Data
Electrical Conductivity
Unlock full details
Full data available with free access
View Complete Material Data
Heat Capacity
Unlock full details
Full data available with free access
View Complete Material Data
Poisson Coefficient
val1
Full data available with free access
View Complete Material Data
Unlock full details
Full data available with free access
View Complete Material Data
This material has 882 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
View Complete Material Data ›
Free registration required • Instant access
Free registration required • Instant access
ISO 4571-316-35-I Heat Treatments
- Hot forming: 1150-850°C, air cooling; Solution annealing (+AT): 1030-1110°C, water or air rapid cooling. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 980°C is adequate as a lower limit for Mo-free steels, a temperature of 1000°C for steels with Mo contents up to 3%, and a temperature of 1020°C for steels with Mo contents exceeding 3%.
- Hot forming: 1200-900°C, air cooling; Solution annealing (+AT): 1020-1120°C, water or air rapid cooling. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 980°C is adequate as a lower limit for Mo-free steels, a temperature of 1000°C for steels with Mo contents up to 3%, a temperature of 1020°C for steels with Mo contents exceeding 3%.
ISO 4571-316-35-I Mechanical Properties
Temperature
Tensile Strength
500 — 2300
MPa
Unlock full details
Full data available with free access
View Complete Material Data
Elongation, A
≥ 12
%
Unlock full details
Full data available with free access
View Complete Material Data
Yield Strength, Rp0.2
≥ 200
MPa
Unlock full details
Full data available with free access
View Complete Material Data
Impact Energy
Unlock full details
Full data available with free access
View Complete Material Data
Reduction of Area
Unlock full details
Full data available with free access
View Complete Material Data
Yield Strength, Rp1
Unlock full details
Full data available with free access
View Complete Material Data
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
View Complete Material Data ›
Book A Demo
Free registration required • Instant access
Free registration required • Instant access
ISO 4571-316-35-I International Equivalent Materials
Showing 15 of 281 results.
MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
STANDARD
AFNOR NF
COUNTRY / PRODUCER
France
EQUIVALENCE CATEGORY
Official
MATERIAL
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Official
MATERIAL
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
STANDARD
B.S.
COUNTRY / PRODUCER
United Kingdom
EQUIVALENCE CATEGORY
Official
MATERIAL
STANDARD
ISO
COUNTRY / PRODUCER
International
EQUIVALENCE CATEGORY
Official
MATERIAL
STANDARD
ISO
COUNTRY / PRODUCER
International
EQUIVALENCE CATEGORY
Official
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 281 international equivalents?
See all 281 equivalent grades with detailed mapping by standard, producer and equivalence category.
View All Equivalents ›
Book A Demo
Free registration required • Instant access
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 281Cross References
- 74Composition
- 163Mechanical Properties
- 19Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 41Stress-Strain
- 22Formability
- 5Fatigue
- -Fracture
- 1Creep
- 62Joints
- -Coatings
- 35Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 177Total Suppliers