ISO 4597-204-76-I Stainless steels
Data updates
This material has 237 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ISO 4597-204-76-I Chemical Composition
ISO 15510: 2014 / Stainless steels -- Chemical composition
Looking for full material performance data?
Free registration required • Instant access
ISO 4597-204-76-I Physical Properties
Temperature
This material has 237 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ISO 4597-204-76-I Heat Treatments
- Hot forming: 1150-850°C, air cooling; Solution annealing (+AT): 1000-1100°C, water or air rapid cooling. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 980°C is adequate as a lower limit for Mo-free steels, a temperature of 1000°C for steels with Mo contents up to 3%, a temperature of 1020°C for steels with Mo contents exceeding 3%.
- Hot forming: 1150-850°C, air cooling; Solution annealing (+AT): 1000-1100°C, water or air rapid cooling. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 980°C is adequate as a lower limit for Mo-free steels, a temperature of 1000°C for steels with Mo contents up to 3%, and a temperature of 1020°C for steels with Mo contents exceeding 3%.
ISO 4597-204-76-I Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ISO 4597-204-76-I International Equivalent Materials
Showing 15 of 75 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 75 international equivalents?
See all 75 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 75Cross References
- 40Composition
- 73Mechanical Properties
- 4Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 1Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 42Total Suppliers