ISO 13 CrMoV12-10 Structural and constructional steels
Data updates
This material has 113 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ISO 13 CrMoV12-10 Chemical Composition
ISO 9328-2: 2018 / Steel flat products for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
Looking for full material performance data?
Free registration required • Instant access
ISO 13 CrMoV12-10 Physical Properties
Temperature
This material has 113 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ISO 13 CrMoV12-10 Heat Treatments
- Minimum tempering temperature shall be 675°C. The purchaser shall inform the manufacturer of his intention to use this tempering temperature of 675°C. In this case, the manufacturer may perform tempering at temperatures lower than 675°C, but not lower than 625°C.
In normalizing, accelerated cooling to obtain the specified mechanical properties may be performed by liquid quenching, air blasting or other methods. Minimum tempering temperature shall be 620°C.
By agreement at the time of enquiry and order, the products may be delivered in the condition +NT or +QT.
Normalizing at 900°C to 1000°C.
Austenitizing at 900°C to 1000°C.
Tempering at 675°C to 760°C.
ISO 13 CrMoV12-10 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ISO 13 CrMoV12-10 International Equivalent Materials
Showing 15 of 46 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 46 international equivalents?
See all 46 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 46Cross References
- 15Composition
- 8Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 40Total Suppliers