EN M1050-50D Magnetic and electrical materials
Data updates
This material has 135 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
EN M1050-50D Physical Properties
Temperature
This material has 135 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
EN M1050-50D Heat Treatments
- Test strips shall be subjected to a heat treatment in a decarburizing atmosphere at 790 °C (+/- 10°C )and shall be maintained for 2 h at this temperature. The heating rate shall not exceed 200°C/h. The cooling rate from 790°C to 550°C shall not exceed 120°C/h. The gas necessary for decarburization shall consist of 20 vol. % H2, 80 vol. % N2, with water vapour, the dew-point being + 35°C at atmospheric pressure.
EN M1050-50D International Equivalent Materials
Showing 15 of 64 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 64 international equivalents?
See all 64 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 64Cross References
- -Composition
- -Mechanical Properties
- 5Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 2Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 63Total Suppliers