ASTM F 2281 304L Stainless steels
Data updates
This material has 1921 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASTM F 2281 304L Chemical Composition
F2281: 2004 / Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
Looking for full material performance data?
Free registration required • Instant access
ASTM F 2281 304L Physical Properties
Temperature
This material has 1921 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASTM F 2281 304L Heat Treatments
- Condition A: heated to 1010 to 1066°C (1850 to 1950°F), held for a sufficient time, then cooled at a rate sufficient to prevent the precipitation of carbides and to provide the specified properties.
Condition CWA: cold formed from annealed or solution annealed stock and then re-annealed or re-solution annealed after all cold working (including heading and threading) has been completed.
Condition HWA: hot formed from annealed or solution annealed stock and then re-annealed or re-solution annealed after all hot forming has been completed.
ASTM F 2281 304L Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASTM F 2281 304L International Equivalent Materials
Showing 15 of 443 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 443 international equivalents?
See all 443 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 443Cross References
- 8Composition
- 12Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 18Dimensions
- -Tribology
- 1238Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 198Total Suppliers