ASME SA-487 Grade 6Q Cast steels
Data updates
This material has 27 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-487 Grade 6Q Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specification, American Society of Mechanical Engineers, 2001
Looking for full material performance data?
Free registration required • Instant access
ASME SA-487 Grade 6Q Physical Properties
Temperature
This material has 27 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-487 Grade 6Q Heat Treatments
- Castings shall be heat treated as follows: Austenitize dat 845°C, liquid quenched to below 260°C and tempered at 595°C minimum. Preliminary heat treatment prior to final heat treatment as well as multiple tempering is permitted. Heat treatment shall be performed after the castings have been allowed to cool below the transformation range. If castings are welded, they shall be post welded heat treated at a temperature of 595°C minimum, (the post weld heat treatment temperature must be at or below the final tempering temperature), or re-heat treated as detailed above. The minimum pre-heat temperature prior to welding shall be 150°C.
ASME SA-487 Grade 6Q Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME SA-487 Grade 6Q International Equivalent Materials
Showing 4 of 7 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 7 international equivalents?
See all 7 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 7Cross References
- 12Composition
- 5Mechanical Properties
- 2Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers