ASME SA-487 Grade 1Q Cast steels
Data updates
This material has 33 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-487 Grade 1Q Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specification, American Society of Mechanical Engineers, 2001
Looking for full material performance data?
Free registration required • Instant access
ASME SA-487 Grade 1Q Physical Properties
Temperature
This material has 33 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-487 Grade 1Q Heat Treatments
- Castings shall be heat treated as follows: Austenitized at 870°C, liquid quenched to below 260°C and tempered at 595°C minimum. Preliminary heat treatment prior to final heat treatment as well as multiple tempering is permitted. Heat treatment shall be performed after the castings have been allowed to cool below the transformation range. If castings are welded, they shall be post welded heat treated at a temperature of 595°C minimum, (the post weld heat treatment temperature must be at or below the final tempering temperature), or re-heat treated as detailed above. The minimum pre-heat temperature prior to welding shall be 95°C.
ASME SA-487 Grade 1Q Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME SA-487 Grade 1Q International Equivalent Materials
Showing 4 of 12 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 12 international equivalents?
See all 12 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 12Cross References
- 11Composition
- 5Mechanical Properties
- 2Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers