PROPRIETARY NAS 625 Nickel Alloys

Material group: Nonferrous Alloys / Nickel Alloys

Country / Standard: PROPRIETARY

Data updates

Latest Update: 2021-09

Total number of updates: 2

Update History

2015-01

This material has 186 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

PROPRIETARY NAS 625 Chemical Composition

CRITERIA

VALUE

UNIT

CAS NUMBER

CRITERIA

VALUE

≤ 0.4

UNIT

CAS NUMBER

7429-90-5

CRITERIA

VALUE

≤ 0.10

UNIT

CAS NUMBER

7440-44-0

CRITERIA

VALUE

≤ 1.0

UNIT

CAS NUMBER

7440-48-4

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-47-3

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-89-6

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-96-5

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-98-7

CRITERIA

Nb+Ta

VALUE

val1

UNIT

CAS NUMBER

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-02-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7723-14-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7704-34-9

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-21-3

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-32-6

Nippon Yakin Kogyo Co., Product Data Sheet,

Looking for full material performance data?

PROPRIETARY NAS 625 Physical Properties

Temperature

0 - 30°C 100 - 300°C ≥ 300°C

PROPERTY / VALUE

Modulus of Elasticity

185 — 207 GPa

Unlock full details

Electrical Resistivity

1.29 Ω∙mm²/m

Unlock full details

Density

val1 kg/dm³

Unlock full details

Heat Capacity

val1 J/(kg∙°C)

Unlock full details

Melting Temperature

val1 °C

Unlock full details

Thermal Conductivity

10.2 W/(m∙°C)

Unlock full details

Electrical Conductivity

val1 S/m

Unlock full details

Poisson Coefficient

val1

Unlock full details

This material has 186 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

PROPRIETARY NAS 625 Heat Treatments

Annealing is normally performed at 871°C and higher followed by being quenched in water or rapidly cooled by other means. Solution annealing is normally performed at 1093°C and higher followed by being quenched in water or rapidly cooled by other means.

PROPRIETARY NAS 625 Mechanical Properties

Temperature

0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

PROPERTY / VALUE

Tensile Strength

≥ 690 MPa

Unlock full details

Brinell Hardness (HB)

val1

Unlock full details

Elongation, A

val1 %

Unlock full details

Rockwell Hardness (HR)

val1

Unlock full details

Yield Strength, Rp0.2

val1 MPa

Unlock full details

Vickers Hardness (HV)

val1

Unlock full details

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

PROPRIETARY NAS 625 International Equivalent Materials

Showing 1 of 89 results.

MATERIAL

STANDARD

COUNTRY / PRODUCER

EQUIVALENCE CATEGORY

MATERIAL

NCF 625

STANDARD

COUNTRY / PRODUCER

Korea

EQUIVALENCE CATEGORY

Implicit

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 89 international equivalents?

See all 89 equivalent grades with detailed mapping by standard, producer and equivalence category.

Optimize material selection for your application - Book A Demo

Looking to compare materials and make better decisions?

Access reliable material data, compare options, and make better decisions faster.

With Total Materia, you can:

Compare materials based on real engineering data

Find equivalent materials across standards

Evaluate performance for your specific conditions

Check compliance with global regulations

See how this works for your specific application

Take a Guided Tour

89Cross References

13Composition
61Mechanical Properties
13Physical Properties
1Heat Treatment
-Metallography
-Machinability

8Stress-Strain
-Formability
-Fatigue
-Fracture
-Creep

-Joints
-Coatings
-Dimensions
-Tribology

-Corrosion
-Ageing
-Weatherability
-Irradiation

1Total Suppliers