AFNOR NF X3CrNiMoAl13-8-2 Stainless steels
Data updates
This material has 729 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
AFNOR NF X3CrNiMoAl13-8-2 Chemical Composition
EN 3359: 2025 / Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Vacuum induction melted and consumable electrode remelted - softened - forging stocks - a or D ≤ 300 mm
Looking for full material performance data?
Free registration required • Instant access
AFNOR NF X3CrNiMoAl13-8-2 Physical Properties
Temperature
This material has 729 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
AFNOR NF X3CrNiMoAl13-8-2 Heat Treatments
- AT - Solutionize: 920-940°C, cool in oil, air or water; P930 - Solutionize: 920-940°C, cool in oil, air or water; precipitate: 620°C, 4 hours and air cool; P1500 - Solutionize: 920-940°C, cool in oil, air or water; precipitate: 510°C, 4 hours and air cool.
- Delivery condition: Solution treated at 900-950°C for at least 30 min, air cooled, water or oil quenched + cooled to 15°C or less.
Solution treated and precipitation treated at 900-950°C for at least 30 min, air cooled, water or oil quenched + cooled to 15°C or less + 545-575°C for 4 hours.
Use condition: Solution treated and precipitation treated: 545-575°C for 4 hours.
AFNOR NF X3CrNiMoAl13-8-2 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
AFNOR NF X3CrNiMoAl13-8-2 International Equivalent Materials
Showing 15 of 318 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 318 international equivalents?
See all 318 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 318Cross References
- 74Composition
- 85Mechanical Properties
- 3Physical Properties
- 7Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 242Total Suppliers