ASME SA-213 TP347HFG Stainless steels
Data updates
This material has 330 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-213 TP347HFG Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 2025
Looking for full material performance data?
Free registration required • Instant access
ASME SA-213 TP347HFG Physical Properties
Temperature
This material has 330 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-213 TP347HFG Heat Treatments
- Solution treatment; Solution treatment shall be preceded by a softening heat treatment prior to cold-working. The softening temperature shall be at least 50°C (90°F) higher than the solution heat treatment temperature, which shall be at 1180°C (2150°F) minimum.
Quenched in water or rapidly cooled by other means, at a rate sufficient to prevent re-precipitation of carbides, as demonstrable by the capability of tubes, heat treated by either separate solution annealing or by direct quenching.
Cooling media: water or other rapid cool.
ASME SA-213 TP347HFG Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME SA-213 TP347HFG International Equivalent Materials
Showing 15 of 76 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 76 international equivalents?
See all 76 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 76Cross References
- 8Composition
- 42Mechanical Properties
- 83Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 1Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 52Creep
- -Joints
- -Coatings
- 21Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 46Total Suppliers