PROPRIETARY 100Cr6 Structural and constructional steels
Data updates
This material has 389 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 100Cr6 Chemical Composition
Gebr. Grieshaber GmbH, Product Data Sheet,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY 100Cr6 Physical Properties
Temperature
This material has 389 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 100Cr6 Heat Treatments
- Hot-forming: 1050 - 900°C. Quenching (+Q): heating up to 650°C, pause, then 800 - 830°C, water cooling. Quenching: 830-870°C, oil/ polymer salt bath 500 - 550°C, salt bath 180 - 200°C. Tempering (+T): 150 - 300°C, air cooling. Stress relief annealing (+SR): 600 - 650°C, furnace cooling. Isorhermal annealing (+I): 800°C, rapid cooling to 720°C, pause, then air cooling. Spheroidized annealing (+AC): 770 - 780°C cooling 15 - 20°C/h to 730°C pause, then 10°C/h to 600°C then 40°C/h to 300°C then air cooling. Recrystallization annealing (+RA): 750 - 760°C furnace cooling to 300°C, then air cooling. Mechanical properties at different tempering temperatures obtained after quenching at 840°C in oil.
PROPRIETARY 100Cr6 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY 100Cr6 International Equivalent Materials
Showing 15 of 169 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 169 international equivalents?
See all 169 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 169Cross References
- 34Composition
- 38Mechanical Properties
- 18Physical Properties
- 3Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 127Total Suppliers