ASTM A 729 Class B Structural and constructional steels

Material group: Ferrous Alloys / Structural and constructional steels

Country / Standard: United States / ASTM

Indicative price:

Data updates

Latest Update: 2015-11

Total number of updates: 1

Update History

This material has 54 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

ASTM A 729 Class B Chemical Composition

CRITERIA

VALUE

UNIT

CAS NUMBER

CRITERIA

VALUE

≤ 0.04

UNIT

CAS NUMBER

7429-90-5

CRITERIA

VALUE

0.28 – 0.33

UNIT

CAS NUMBER

7440-44-0

CRITERIA

VALUE

0.80 – 1.10

UNIT

CAS NUMBER

7440-47-3

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-96-5

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-98-7

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7723-14-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7704-34-9

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-21-3

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-62-2

A729/A729M: 2017 / Standard Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service

Looking for full material performance data?

ASTM A 729 Class B Physical Properties

Temperature

0 - 30°C

PROPERTY / VALUE

Modulus of Elasticity

190 — 210 GPa

Unlock full details

Density

7.67 — 7.86 kg/dm³

Unlock full details

Poisson Coefficient

0.27 — 0.3

Unlock full details

This material has 54 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

ASTM A 729 Class B Heat Treatments

After heating to and holding at an appropriate temperature in the austenitic range, the axles shall be quenched in a suitable medium. A furnace charge thus treated is termed a quenching charge. Following quenching, the axles are tempered.
Tempering - Axles shall be reheated gradually to and held at an appropriate subcritical temperature and shall then be allowed to cool under uniform conditions. A furnace charge thus treated is termed a tempering charge. When required by supplementary requirement S2, axles that have been rough machined after heat treatment shall be heated to and held for an appropriate time at a temperature that is less than the last tempering temperature by at least 10°C (50°F). Then the axles shall be quenched directly into water with the axle length vertical.
Straightening- if necessary, shall be done before machining and at a temperature between 510°C (950°F) and 55°C (100°F) below the final tempering temperature. Straightening performed at temperatures lower than 510°C (100°F) shall be followed by stress relieving or applicable heat treatment. These requirements do not apply to straightening performed prior to final heat treatment.

ASTM A 729 Class B Mechanical Properties

Temperature

0 - 30°C

PROPERTY / VALUE

Tensile Strength

≥ 570 MPa

Unlock full details

Elongation, A

≥ 19 %

Unlock full details

Reduction of Area

val1 %

Unlock full details

Yield Strength, Rp0.2

≥ 330 MPa

Unlock full details

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

Optimize material selection for your application - Book A Demo

Looking to compare materials and make better decisions?

Access reliable material data, compare options, and make better decisions faster.

With Total Materia, you can:

Compare materials based on real engineering data

Find equivalent materials across standards

Evaluate performance for your specific conditions

Check compliance with global regulations

See how this works for your specific application

Take a Guided Tour

6Cross References

9Composition
16Mechanical Properties
3Physical Properties
1Heat Treatment
-Metallography
-Machinability

-Stress-Strain
-Formability
-Fatigue
-Fracture
-Creep

-Joints
-Coatings
19Dimensions
-Tribology

-Corrosion
-Ageing
-Weatherability
-Irradiation

-Total Suppliers