PROPRIETARY 819AW Tool steels
Data updates
This material has 255 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 819AW Chemical Composition
Aubert & Duval, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY 819AW Physical Properties
Temperature
This material has 255 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 819AW Heat Treatments
- Annealed condition: Heat to 680°C followed by slow cooling.
Sub-zero cooled, tempered: Air cool from 875°C. Sub-zero treatment (-75°C). Temper at 200°C.
Tempered: Air cool from 875°C. Temper at 650°C. Air cool from 875°C. Temper at 650°C.
Harden: Heat to 875°C; Air cool or gas pressure.
Temper: Depending on properties required.
Forged: 1100/900°C. - Quenching:
- preheating to 650°C,
- heating to 875°C,
- quenching in hot oil, or in salt baths, or under gas pressure.
- Cold treatment at -76°C(recommended).
Tempering: From 120°C depending on the hardness required.
Quenched and tempered (I): air quenching at 875°C + tempering 200°C
Quenched and tempered (II):air quenching at 875°C + tempering 650°C
Annealing: 680°C followed by a very slow cooling.
PROPRIETARY 819AW Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY 819AW International Equivalent Materials
Showing 15 of 85 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 85 international equivalents?
See all 85 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 85Cross References
- 13Composition
- 63Mechanical Properties
- 15Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 77Total Suppliers