PROPRIETARY CRUCIBLE Nu-Die V Tool steels
Data updates
This material has 35 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CRUCIBLE Nu-Die V Chemical Composition
Crucible Industries LLC., Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY CRUCIBLE Nu-Die V Physical Properties
Temperature
This material has 35 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CRUCIBLE Nu-Die V Heat Treatments
- Annealed: Heat to 1600°F (870°C), hold 2 hours, slow cool 25°F (14°C) per hour to 1200°F (650°C) then air cool. OR heat to 1600°F (870°C), hold 2 hrs., cool to 1400°F (760°C) hold 6 hrs. then air cool. Stress relieved: Annealed Parts: Heat to 1200-1250°F (650-675°C), hold 2 hours, then cool in still air to room temperature. Hardened Parts: Heat to 25-50°F (15-25°C) below the original tempering temperature, hold 2 hours, then cool in still air to room temperature. Hardened: Critical Temperature: 1560°F (850°C). Preheat: Heat to 1100-1250°F (595-675°C), equalize, hen to 1450-1550°F (790-845°C), equalize. Austenitize: 1825-1875°F (995-1025°C), hold time at temperature 30-45 minutes. Quench: Air or positive pressure quench (2 bar minimum), salt or interrupted oil to below 150°F (65°C). Temper: 1000-1200°F (540-650°C). Temper twice. Temper 2 hours minimum each time or at least 1 hour per inch (25mm) of thickness. Air cool to room temperature.
PROPRIETARY CRUCIBLE Nu-Die V Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY CRUCIBLE Nu-Die V International Equivalent Materials
Showing 1 of 13 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 13 international equivalents?
See all 13 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 13Cross References
- 5Composition
- 11Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers