PROPRIETARY SIRIUS 310 S Stainless steels
Data updates
This material has 499 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SIRIUS 310 S Chemical Composition
Arcelor Mittal, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY SIRIUS 310 S Physical Properties
Temperature
This material has 499 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SIRIUS 310 S Heat Treatments
- Hot forming should be carried out at 1200 - 950°C after the piece has been uniformly heat treated. Final full annealing heat treatment at 1000 - 1150°C followed by rapid quenching is generally recommended after hot forming, particularly when temperature drops below 1000°C during hot forming operation.
- Hot forming should be carried out in a temperature range of 1200 - 950°C (2192 - 1742°F) after the piece has been uniformly heat treated. Final full annealing heat treatment at 1000 - 1150°C (1832 - 2102°F) followed by rapid quenching is generally recommended after hot forming, particularly when temperature drops below 1000°C (1832°F) during hot forming operation. Cold forming on aged structures, after long term exposure at high temperature, is not recommended since the alloy is sensitive to intergranular carbide precipitations and intermetallic phase precipitations, mainly between 650 and 900°C (1202 and 1652°F). Use non sulphur and tighly oxidizing atmospheres for heat treatments.
PROPRIETARY SIRIUS 310 S Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY SIRIUS 310 S International Equivalent Materials
Showing 15 of 188 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 188 international equivalents?
See all 188 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 188Cross References
- 8Composition
- 56Mechanical Properties
- 89Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 12Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 1Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 143Total Suppliers