PROPRIETARY CS 304 L Stainless steels
Data updates
This material has 1429 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CS 304 L Chemical Composition
Columbus Stainless (Pty) Ltd, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY CS 304 L Physical Properties
Temperature
This material has 1429 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CS 304 L Heat Treatments
- Annealing: heating to between 1010 and 1120°C for 60 minutes per 25 mm of thickness (2.5 min/mm) followed by water or air quenching. The best corrosion resistance is achieved when the final annealing temperature is above 1070°C.
Stress relieving: can be stress relieved at 450 to 600°C for 45 minutes per 25 mm of thickness (1.5 min/mm) with little danger of sensitization. If, however, stress relieving is to be carried out above 600°C, there is a serious threat of grain boundary sensitization occurring with a concomitant loss in corrosion resistance.
PROPRIETARY CS 304 L Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY CS 304 L International Equivalent Materials
Showing 1 of 125 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 125 international equivalents?
See all 125 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 125Cross References
- 8Composition
- 38Mechanical Properties
- 17Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- 1236Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers