NBR 1008 Structural and constructional steels
Data updates
This material has 944 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
NBR 1008 Chemical Composition
NBR NM 87: 1996 / Carbon steel and steel alloy for general engineering purposes - Designation and chemical composition
Looking for full material performance data?
Free registration required • Instant access
NBR 1008 Physical Properties
Temperature
This material has 944 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
NBR 1008 Heat Treatments
- Heat treatment procedure above critical temperature Ac1: 1. Uniformal heating to not more than 50 °C above the Ac1; 2. Cooling in protecting atmosphere to temperature not less then 50 °C below the Ac1.
- The white annealing temperature is variable depending on the chemical composition, thickness, surface roughness, cold reduction imposed on the material and the desired conformation quality for the annealed product: commercial quality (QC), medium stamping (MS), deep stamping (EP) and extra-deep stamping (EEP). The white anneal is subcritical and therefore the temperature therein is above the recrystallization temperature under the metallurgical conditions in which the product is present and below the critical transformation temperature (550°C- 730°C).
NBR 1008 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
NBR 1008 International Equivalent Materials
Showing 15 of 578 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 578 international equivalents?
See all 578 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 578Cross References
- 38Composition
- 20Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 3Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 300Total Suppliers