IS 12Cr9Mo10H Structural and constructional steels
Data updates
This material has 46 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
IS 12Cr9Mo10H Chemical Composition
IS 1570-7: 1992 / Schedule for wrought steels Part 7 Steels for elevated temperature service (creep resistant steels)
Looking for full material performance data?
Free registration required • Instant access
IS 12Cr9Mo10H Physical Properties
Temperature
This material has 46 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
IS 12Cr9Mo10H Heat Treatments
- Normalizing: 900-960°C, 1-2 min per 1 mm thickness of forging or pipe wall but not less then 20 min; Tempering: 650-780°C , 1-3 min per 1 mm thickness but not less than 15 min; Stress relief of annealing or tempering after bending or welding: 730-760°C, 2 min per 1 mm thickness but not less than 15 min; Quenching: 930-1030°C, cooling in oil or water; Tempering: 650-760°C.
IS 12Cr9Mo10H Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- -Cross References
- 8Composition
- 32Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 2Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers