ASTM A 249 S30500 Stainless steels
Data updates
This material has 863 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASTM A 249 S30500 Chemical Composition
A249/A249M: 2024 / Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
Looking for full material performance data?
Free registration required • Instant access
ASTM A 249 S30500 Physical Properties
Temperature
This material has 863 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASTM A 249 S30500 Heat Treatments
- Solution heat treated at min 1040°C (1900°F). Quenched in water or rapidly cooled by other methods, at a rate sufficient to prevent reprecipitation of chromium carbides. The manufacturer is not required to run the test unless it is specified on the purchase order. Test shall be performed on sensitized specimens in the low carbon and stabilized types and on specimens representative of the as-shipped condition of the other types. In the case of low-carbon types containing 3% or more molybdenum, the applicability of the sensitizing treatment prior to testing shall be a matter for negotiation between the seller and purchaser.
ASTM A 249 S30500 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASTM A 249 S30500 International Equivalent Materials
Showing 15 of 520 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 520 international equivalents?
See all 520 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 520Cross References
- 7Composition
- 5Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 54Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 273Total Suppliers