NS 1.0595 Structural and constructional steels
Data updates
This material has 1437 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
NS 1.0595 Chemical Composition
EN 10025: 1993 / Hot rolled products of non-alloy structural steels; technical delivery conditions
Looking for full material performance data?
Free registration required • Instant access
NS 1.0595 Physical Properties
Temperature
This material has 1437 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
NS 1.0595 Heat Treatments
- Welded and cold sized (+CR2) - Not intended for heat treatment after the welding and sizing. If further heat treatment is applied, the resulting mechanical properties may be outside the specified requirements.
- Welded and cold sized (+CR1) - Normally not heat treated, but suitable for final annealing. After annealing or normalizing, the resulting mechanical properties meet the requirements specified for the delivery condition +A or +N, respectively.
Welded and cold sized (+CR2) - Not intended for heat treatment after the welding and sizing. If further heat treatment is applied, the resulting mechanical properties may be outside the specified requirements.
NS 1.0595 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
NS 1.0595 International Equivalent Materials
Showing 15 of 725 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 725 international equivalents?
See all 725 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 725Cross References
- 17Composition
- 86Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- 1Formability
- 5Fatigue
- -Fracture
- -Creep
- 101Joints
- -Coatings
- 34Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 463Total Suppliers