NBN 14 NiCrMo 13-4 Structural and constructional steels
Data updates
This material has 147 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
NBN 14 NiCrMo 13-4 Chemical Composition
EN 10084: 2008 / Case hardening steels - Technical delivery conditions
Looking for full material performance data?
Free registration required • Instant access
NBN 14 NiCrMo 13-4 Physical Properties
Temperature
This material has 147 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
NBN 14 NiCrMo 13-4 Heat Treatments
- End quench test: Quench from 880°C. Carburizing: 880 to 980°C; NOTE: If steels are direct hardened, in general, a carburizing temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures (for example 1020 to 1050°C) are not unusual. Core hardening: 840 to 880°C; Case hardening: 780°C to 820°C; Tempering: 150 to 200°C (as a guide, for 1 hour minimum).
NBN 14 NiCrMo 13-4 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
NBN 14 NiCrMo 13-4 International Equivalent Materials
Showing 15 of 62 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 62 international equivalents?
See all 62 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 62Cross References
- 8Composition
- 7Mechanical Properties
- 3Physical Properties
- 7Heat Treatment
- 2Metallography
- -Machinability
- -Stress-Strain
- -Formability
- 5Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 53Total Suppliers