AFNOR NF 1.4520 Stainless steels
Data updates
This material has 552 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
AFNOR NF 1.4520 Chemical Composition
EN 10088-2: 2024 / Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Looking for full material performance data?
Free registration required • Instant access
AFNOR NF 1.4520 Physical Properties
Temperature
This material has 552 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
AFNOR NF 1.4520 Heat Treatments
- Hot forming: 1100 - 800°C, air cooling. Annealing: 820 - 880°C, air, water cooling.
- Hot working (air cooling): 1100-800°C
+A - Annealing (air cooling): 750-850°C.
Hot formed conditions:
1U - Hot formed, not heat treated, not descaled.
1C - Hot formed, heat treated, not descaled.
1E - Hot formed, heat treated, mechanically descaled.
1D - Hot formed, heat treated, pickled, coated (optional).
1X - Hot formed, heat treated, rough machined.
1G - Hot formed, heat treated, descaled, rough machined or shaved in the case of rod.
Cold processed conditions:
2H - Finishes 1E, 1D or 1X, cold processed, coated (optional).
2D - Finish 2H, heat treated, pickled and skin- passed (optional), coated (optional).
2B - Finishes 1E, 1D or 1X, cold processed, mechanically smoothed.
2G - Finishes 2H, 2D or 2B, centreless ground, mechanically smoothed (optional).
P - Finishes 2H, 2D, 2B or 2G, specular polishing.
AFNOR NF 1.4520 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
AFNOR NF 1.4520 International Equivalent Materials
Showing 15 of 241 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 241 international equivalents?
See all 241 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 241Cross References
- 32Composition
- 52Mechanical Properties
- 18Physical Properties
- 3Heat Treatment
- -Metallography
- -Machinability
- 11Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 2Joints
- -Coatings
- 4Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 189Total Suppliers