PROPRIETARY KeyLos 2083 Stainless steels
Data updates
This material has 236 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY KeyLos 2083 Chemical Composition
Lucchini RS, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY KeyLos 2083 Physical Properties
Temperature
This material has 236 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY KeyLos 2083 Heat Treatments
- Supplied in the annealed condition with hardness lower than 220 HB, or in the prehardened condition. Soft annealing: at 750°C, soaking time 60 min every 25 mm thickness, cooling slow in the furnace. Stress relieving at 650°C, soaking time 60 min every 25 mm thickness, cooling slow in the furnace. Hardening: at 700°C, heating: 50°C/h max, soaking time 60 min every 25 mm thickness. Austenising at 980°C, heating 50°C/h max, soaking time 60 min every 25 mm thickness, cooling in the oil or salt bath. Tempering temperature depends on the required mechanical properties, soaking time: 60 min every 25 mm thickness, cooling at room temperature.
PROPRIETARY KeyLos 2083 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY KeyLos 2083 International Equivalent Materials
Showing 15 of 109 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 109 international equivalents?
See all 109 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 109Cross References
- 4Composition
- 5Mechanical Properties
- 11Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 106Total Suppliers