PROPRIETARY EskyLos 6959 Tool steels
Data updates
This material has 28 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY EskyLos 6959 Chemical Composition
Lucchini RS, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY EskyLos 6959 Physical Properties
Temperature
This material has 28 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY EskyLos 6959 Heat Treatments
- Normally supplied in the pre-hardened condition in two hardness ranges: hardness between 300 and 360 HB, hardness between 360 and 420 HB. Soft annealing: at 850°C, heating max 50°C/h, soaking time minimum 120 min from when the temperature settles, cooling slow in the furnace. Stress relieving at 700°C, soaking time 60 min every 25 mm thickness, cooling slow in the furnace at max 20°C/h to 600°C, then at room temperature. Hardening: at 850°C, soaking time 60 min every 25mm thickness, cooling oil or water quench. The tempering temperature to be applied to the material depends on the required mechanical properties, soaking time 60 min every 25 mm thickness, cooling at room temperature.
PROPRIETARY EskyLos 6959 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY EskyLos 6959 International Equivalent Materials
Showing 2 of 2 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 2 international equivalents?
See all 2 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 2Cross References
- 7Composition
- 4Mechanical Properties
- 11Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 3Total Suppliers