PROPRIETARY Pyrowear Alloy 53 Structural and constructional steels
Data updates
This material has 49 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Pyrowear Alloy 53 Chemical Composition
Carpenter Technology Corporation, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Pyrowear Alloy 53 Physical Properties
Temperature
This material has 49 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Pyrowear Alloy 53 Heat Treatments
- Normalizing: Forgings are normalized by heating rapidly to 1010°C and cooling in air;
Annealing: Heat to 696/713°C, hold 4 to 8 h and cool slowly in the furnace. Maximum hardness is 248 Brinell. To relieve machining stresses, heat to 593°C, hold for 1 hour at heat, then air cool; Hardening: Can be hardened by air cooling or oil quenching from 904/921°C. Oil quenching produces the optimum core impact strength; Cold Treatment: To obtain maximum case hardness and dimensional stability, cold treating after hardening is recommended. This is performed by holding the material for one hour at a temperature below -73°C and allowing a natural return to room temperature. The part should be tempered after the sub-zero treatment; Tempering: Is designed to possess significantly greater case temper resistance.
PROPRIETARY Pyrowear Alloy 53 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Pyrowear Alloy 53 International Equivalent Materials
Showing 2 of 2 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 2 international equivalents?
See all 2 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 2Cross References
- 9Composition
- 16Mechanical Properties
- 16Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- 3Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers