PROPRIETARY Micro-Melt A11-LVC Tool Steel Tool steels

Material group: Ferrous Alloys / Tool steels
Country / Standard: PROPRIETARY

Data updates

Latest Update: 2022-02
Total number of updates: 1
Update History

This material has 31 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Micro-Melt A11-LVC Tool Steel Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
1.70 – 1.85
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
4.75 – 5.75
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Fe
VALUE
Balance
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
S
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
V
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-62-2

Carpenter Technology Corporation, Product Data Sheets,

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Micro-Melt A11-LVC Tool Steel Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
190 — 210 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
7.391 — 8 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
0.27 — 0.3
Unlock full details
Full data available with free access View Complete Material Data

This material has 31 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Micro-Melt A11-LVC Tool Steel Heat Treatments

  • Annealing: heat slowly to 871/899°C (1600/1650°F), hold for 2 hours, cool slowly at a rate of 11/22°C (20/40°F) per hour to 538°C (1000°F), then air cool. Typical annealed hardness will be 255 to 277 Brinell.
    Hardening: preheat to 816/843°C (1500/1550°F), equalize, and transfer to a furnace maintained at the desired hardening temperature. Tools are usually held at heat for 30 to 60 minutes. Tough treatment: austenitize at 1066°C (1950°F) 30/60 minutes, air cool. Temper immediately to HRC 48/50. Wear Treatment: austenitize at 1121°C (2050°F) 15/30 minutes, air cool. Temper immediately to HRC 53/55.
    Stress Relieving: first rough machine, then heat to a temperature of 621/677°C (1150/1250°F), equalize, and cool slowly in still air.
    Tempering: tempering is usually performed in the temperature range of 538/593°C (1000/1100°F).

Optimize material selection for your application - Book A Demo

  • -Cross References
  • 8Composition
  • -Mechanical Properties
  • 19Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • 2Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 1Total Suppliers