PROPRIETARY Hiperco 50 HS Magnetic and electrical materials

Material group: Ferrous Alloys / Magnetic and electrical materials

Country / Standard: PROPRIETARY

Data updates

Latest Update: 2021-07

Total number of updates: 2

Update History

2016-02

This material has 63 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

PROPRIETARY Hiperco 50 HS Chemical Composition

CRITERIA

VALUE

UNIT

CAS NUMBER

CRITERIA

VALUE

0.01

UNIT

CAS NUMBER

7440-44-0

CRITERIA

VALUE

48.75

UNIT

CAS NUMBER

7440-48-4

CRITERIA

VALUE

Balance

UNIT

CAS NUMBER

7439-89-6

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-03-1

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-62-2

Carpenter Technology Corporation, Product Data Sheets,

Looking for full material performance data?

PROPRIETARY Hiperco 50 HS Physical Properties

Temperature

0 - 30°C 100 - 300°C ≥ 300°C

PROPERTY / VALUE

Modulus of Elasticity

190 — 210 GPa

Unlock full details

Electrical Resistivity

0.421 Ω∙mm²/m

Unlock full details

Density

val1 kg/dm³

Unlock full details

Electrical Conductivity

val1 S/m

Unlock full details

Poisson Coefficient

val1

Unlock full details

Thermal Conductivity

29.83 W/(m∙°C)

Unlock full details

This material has 63 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

PROPRIETARY Hiperco 50 HS Heat Treatments

A dry hydrogen atmosphere or a high vacuum is recommended to minimize oxide contamination of the parts during annealing. When hydrogen is employed, the entry dew point should be dryer than-51°C (-60°F) and the exit dew point dryer than about -40°C (-40°F) when the inside retort temperature is above 482°C (900°F).
Anneal parts at 704-760°C (1300-1400°F) for 1-4 hours in dry hydrogen or vacuum and cool at 83-194°C/h (150-350°F)/h until 316°C (600°F) is reached, after which any cooling rate can be employed.
The exact heat treat temperature to be employed will depend upon the particular application and the desired compromise between magnetic and mechanical properties. With increasing temperature the magnetic properties improve while the yield and tensile strengths decrease. The temperature at no time should exceed 871°C (1600°F) as an upper limit, as the soft magnetic characteristics start to degrade due to formation of an austenitic phase.

PROPRIETARY Hiperco 50 HS Mechanical Properties

Temperature

0 - 30°C

PROPERTY / VALUE

Tensile Strength

979 — 1280 MPa

Unlock full details

Elongation, A

11 — 15 %

Unlock full details

Yield Strength, Rp0.2

441 — 683 MPa

Unlock full details

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

Optimize material selection for your application - Book A Demo

Looking to compare materials and make better decisions?

Access reliable material data, compare options, and make better decisions faster.

With Total Materia, you can:

Compare materials based on real engineering data

Find equivalent materials across standards

Evaluate performance for your specific conditions

Check compliance with global regulations

See how this works for your specific application

Take a Guided Tour

-Cross References

5Composition
30Mechanical Properties
16Physical Properties
1Heat Treatment
-Metallography
-Machinability

10Stress-Strain
-Formability
-Fatigue
-Fracture
-Creep

-Joints
-Coatings
-Dimensions
-Tribology

-Corrosion
-Ageing
-Weatherability
-Irradiation

1Total Suppliers