PROPRIETARY Carpenter Silicon Core Iron A Magnetic and electrical materials
Data updates
This material has 33 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Carpenter Silicon Core Iron A Chemical Composition
Carpenter Technology Corporation, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Carpenter Silicon Core Iron A Physical Properties
Temperature
This material has 33 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Carpenter Silicon Core Iron A Heat Treatments
- Finish fabricated parts must be heat treated to achieve soft magnetic characteristics. Suggested heat treating atmosphere is a wet hydrogen atmosphere in the temperature range of 843/871°C (1550/1600°F), two to four hours at temperature and cooled 56/111°C (100/200°F) to 538°C (1000°F) and any rate thereafter. Other heat treating atmospheres can be employed, such as nitrogen-hydrogen combinations, vacuum, exothermication and inert atmosphere retort. Resulting magnetic characteristics will not be as good as the wet hydrogen atmosphere, which provides the best degree of decarburization. Other heat treatment temperatures in the range of 732/1038°C (1350/1950°F) can be employed to achieve certain advantages such as brazing and fine grain size as required by end application. A sacrifice in certain magnetic characteristics will be realized. A dry atmosphere must be employed at 954°C (1750°F) and above.
PROPRIETARY Carpenter Silicon Core Iron A Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Carpenter Silicon Core Iron A International Equivalent Materials
Showing 5 of 7 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 7 international equivalents?
See all 7 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 7Cross References
- 4Composition
- 8Mechanical Properties
- 8Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 5Total Suppliers