PROPRIETARY CarTech BioDur 108 Alloy Stainless steels
Data updates
This material has 141 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CarTech BioDur 108 Alloy Chemical Composition
Carpenter Technology Corporation, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY CarTech BioDur 108 Alloy Physical Properties
Temperature
This material has 141 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CarTech BioDur 108 Alloy Heat Treatments
- Annealing: Heated at 1040-1150°C (1900-2100°F). Typically the alloy is annealed in the lower part of this range to preserve a fine grain size. The alloy should be rapidly cooled from the annealing temperature. This is because slow cooling through the range from 980 to 810°C (1800-1500°F) under some circumstances can cause precipitation of a chromium nitride phase (Cr2N) which could adversely affect corrosion resistance and toughness. Annealing at 1065°C (1950°F) for one hour, followed by a water quench, may be used in most cases.
It cannot be hardened by heat treatment. It must be hardened by cold working.
PROPRIETARY CarTech BioDur 108 Alloy Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY CarTech BioDur 108 Alloy International Equivalent Materials
Showing 3 of 5 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 5 international equivalents?
See all 5 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 5Cross References
- 11Composition
- 92Mechanical Properties
- 7Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 21Stress-Strain
- -Formability
- 1Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 3Total Suppliers