ASTM A 473 410 Stainless steels
Data updates
This material has 896 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASTM A 473 410 Chemical Composition
A473: 2026 / Standard Specification for Stainless Steel Forgings
Looking for full material performance data?
Free registration required • Instant access
ASTM A 473 410 Physical Properties
Temperature
This material has 896 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASTM A 473 410 Heat Treatments
- Annealed, or hardened and tempered as specified. Liquid quenching shall be permitted only by agreement with the purchaser
Material shall be air cooled or liquid quenched from 925°C (1700°F), minimum, followed by being held at the tempering temperature for at least 1 h/in. (25.4 mm) of cross section in accordance with:
Condition 1 - 675°C (1250°F) minimum, 760°C (1400°F) maximum.
Condition 2 - 595°C (1100°F) minimum, 760°C (1400°F) maximum.
Condition 3 - 565°C (1050°F) minimum, 760°C (1400°F) maximum.
Heat treating at 955°C ± 14°C (1750 ± 25°F) and quenching in the air (samples for testing shall be in the form of a section not exceeding 9.50 mm in thickness).
ASTM A 473 410 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASTM A 473 410 International Equivalent Materials
Showing 15 of 494 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 494 international equivalents?
See all 494 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 494Cross References
- 7Composition
- 21Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 38Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 332Total Suppliers