ASTM A 350 Grade LF2 Class 2 Structural and constructional steels
Data updates
This material has 8959 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASTM A 350 Grade LF2 Class 2 Chemical Composition
A350/A350M: 2026 / Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
Looking for full material performance data?
Free registration required • Instant access
ASTM A 350 Grade LF2 Class 2 Physical Properties
Temperature
This material has 8959 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASTM A 350 Grade LF2 Class 2 Heat Treatments
- Furnished in the normalized, or normalized and tempered, or quenched and tempered condition. Quenching shall consist of either fully austenitizing the forgings followed by quenching in a suitable liquid medium, or using a multiple stage procedure whereby the forging is first fully austenitized and rapidly cooled, then reheated to partially re-asutenitize, followed by quenching in a suitable liquid medium. Forgings, when tempered, shall be tempered at 593°C (1100°F), minimum, holding at temperature a minimum of 30 min/25 mm (30 min/in.) of maximum thickness, but in no case less than 30 min.
ASTM A 350 Grade LF2 Class 2 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASTM A 350 Grade LF2 Class 2 International Equivalent Materials
Showing 15 of 149 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 149 international equivalents?
See all 149 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 149Cross References
- 14Composition
- 6Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 24Creep
- 142Joints
- -Coatings
- 4Dimensions
- 1Tribology
- 8491Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 124Total Suppliers