AISI 440 B Stainless steels
Data updates
This material has 338 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
AISI 440 B Chemical Composition
SAE AMS-QQ-S-763D: 2013 / Steel, Corrosion Resistant, Bars, Wire, Shapes and Forgings
Looking for full material performance data?
Free registration required • Instant access
AISI 440 B Physical Properties
Temperature
This material has 338 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
AISI 440 B Heat Treatments
- Annealed, or hardened and tempered as specified. Liquid quenching shall be permitted only by agreement with the purchaser
Heat treating at 1020°C ± 14°C (1875 ± 25°F) and quenching in the air (samples for testing shall be in the form of a section not exceeding 9.50 mm in thickness)
It should be used by the purchaser in the hardened and tempered condition. - After heat treating at 1025°C ± 15°C (1875°F ± 25°F) and oil quenching, grade shall be capable of meeting the hardness of 56 HRC minimum (testing section t ≤ 9.50 mm).
AISI 440 B Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
AISI 440 B International Equivalent Materials
Showing 15 of 142 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 142 international equivalents?
See all 142 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 142Cross References
- 42Composition
- 11Mechanical Properties
- 3Physical Properties
- 5Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 21Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 114Total Suppliers