AISI 403 Stainless steels
Data updates
This material has 649 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
AISI 403 Chemical Composition
SAE AMS-QQ-S-763D: 2013 / Steel, Corrosion Resistant, Bars, Wire, Shapes and Forgings
Looking for full material performance data?
Free registration required • Instant access
AISI 403 Physical Properties
Temperature
This material has 649 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
AISI 403 Heat Treatments
- Air quenching at min 955°C ± 14°C (1750 ± 25°F).
- Annealed, or hardened and tempered as specified. Liquid quenching shall be permitted only by agreement with the purchaser
Material shall be air cooled or liquid quenched from 925°C (1700°F), minimum, followed by being held at the tempering temperature for at least 1 h/in. (25.4 mm) of cross section in accordance with:
Condition 1 - 675°C (1250°F) minimum, 760°C (1400°F) maximum.
Condition 2 - 595°C (1100°F) minimum, 760°C (1400°F) maximum.
Condition 3 - 565°C (1050°F) minimum, 760°C (1400°F) maximum.
Heat treating at 955°C ± 14°C (1750 ± 25°F) and quenching in the air (samples for testing shall be in the form of a section not exceeding 9.50 mm in thickness).
AISI 403 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
AISI 403 International Equivalent Materials
Showing 15 of 254 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 254 international equivalents?
See all 254 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 254Cross References
- 45Composition
- 82Mechanical Properties
- 3Physical Properties
- 5Heat Treatment
- -Metallography
- 1Machinability
- -Stress-Strain
- 1Formability
- 5Fatigue
- -Fracture
- 1Creep
- 11Joints
- -Coatings
- 81Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 160Total Suppliers