SAE Custom 455 Grade 1 Stainless steels
Data updates
This material has 151 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE Custom 455 Grade 1 Chemical Composition
SAE AMS 5617L: 2024 / Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock 12Cr - 8.5Ni - 1.2Ti - 2.0Cu Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
Looking for full material performance data?
Free registration required • Instant access
SAE Custom 455 Grade 1 Physical Properties
Temperature
This material has 151 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE Custom 455 Grade 1 Heat Treatments
- Bars, wire, and forgings shall be solution heat treated by heating to 829°C ± 14°C (1525°F ± 25°F), holding at heat for not less than 30 minutes, and quenching in oil or water.
Wire, heat treated in a continuous process, shall be solution heat treated by heating to a temperature not lower than 829°C (1525°F), holding at heat for a time commensurate with thickness and the heating equipment and procedure used, and cooling in air.
Precipitation heat treated:
H 950: 510°C ± 6°C (950°F ± 10°F), 4 hours ± 0.25 h.
H1000: 538°C ± 6°C (1000°F ± 10°F), 4 hours ± 0.25 h.
SAE Custom 455 Grade 1 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE Custom 455 Grade 1 International Equivalent Materials
Showing 15 of 31 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 31 international equivalents?
See all 31 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 31Cross References
- 12Composition
- 35Mechanical Properties
- 24Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 8Stress-Strain
- -Formability
- -Fatigue
- 1Fracture
- -Creep
- -Joints
- -Coatings
- 28Dimensions
- -Tribology
- -Corrosion
- 2Ageing
- -Weatherability
- -Irradiation
- 9Total Suppliers