SAE 5412 Stainless steels

Material group: Ferrous Alloys / Stainless steels

Country / Standard: United States / SAE

Data updates

Latest Update: -

Total number of updates: 0

This material has 36 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

SAE 5412 Chemical Composition

CRITERIA

VALUE

UNIT

CAS NUMBER

CRITERIA

VALUE

0.90 – 1.35

UNIT

CAS NUMBER

7429-90-5

CRITERIA

VALUE

≤ 0.05

UNIT

CAS NUMBER

7440-44-0

CRITERIA

VALUE

12.25 – 13.25

UNIT

CAS NUMBER

7440-47-3

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-96-5

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-98-7

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7727-37-9; 17778-88-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-02-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7723-14-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7704-34-9

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-21-3

SAE AMS 5412B: 2019 / Steel Castings, Vacuum Melted, Vacuum Cast, Investment, Corrosion Resistant 13Cr - 8.0Ni - 2.2Mo - 1.1Al (195,000 psi (1344 MPa) Tensile Strength (Condition H1000) Homogenized, Solution, and Precipitation Heat Treated

Looking for full material performance data?

SAE 5412 Physical Properties

Temperature

0 - 30°C

PROPERTY / VALUE

Modulus of Elasticity

190 — 215 GPa

Unlock full details

Density

7.61 — 8.1 kg/dm³

Unlock full details

Poisson Coefficient

0.27 — 0.3

Unlock full details

This material has 36 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

SAE 5412 Heat Treatments

Homogenization: Heated to 2100°F ± 25°F (1149°C ± 14°C), held at heat for 60 minutes per inch (25 mm) of maximum cross-section but not less than 90 minutes, and force air cool to room temperature
Solution: Heated to 1700°F ± 25°F (927°C ± 14°C), held at heat for 60 minutes per inch (25 mm) of maximum cross-section but not less than 30 minutes and cooled to below 90°F (32°C) at a rate equivalent to air cool or faster. Below 1200°F (649°C), a rapid air cool is acceptable
Refrigeration: Cooled to 60°F (16°C) or lower, held at temperature for not less than 30 minutes, and warm in air
Precipitation: Heated to 1000°F ± 10°F (538°C ± 6°C), held at heat for not less than 4 hours and cooled in air to room temperature
All thermal treatments above 1200°F (649°C) shall be performed in a protective atmosphere of vacuum, argon or equivalent

SAE 5412 Mechanical Properties

Temperature

0 - 30°C

PROPERTY / VALUE

Tensile Strength

1345 — 1482 MPa

Unlock full details

Elongation, A

≥ 5 %

Unlock full details

Reduction of Area

val1 %

Unlock full details

Rockwell Hardness (HR)

val1

Unlock full details

Yield Strength, Rp0.2

≥ 1241 MPa

Unlock full details

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

Optimize material selection for your application - Book A Demo

Looking to compare materials and make better decisions?

Access reliable material data, compare options, and make better decisions faster.

With Total Materia, you can:

Compare materials based on real engineering data

Find equivalent materials across standards

Evaluate performance for your specific conditions

Check compliance with global regulations

See how this works for your specific application

Take a Guided Tour

16Cross References

10Composition
5Mechanical Properties
3Physical Properties
1Heat Treatment
-Metallography
-Machinability

-Stress-Strain
-Formability
-Fatigue
-Fracture
-Creep

1Joints
-Coatings
-Dimensions
-Tribology

-Corrosion
-Ageing
-Weatherability
-Irradiation

-Total Suppliers