CSA 60W Structural and constructional steels
Data updates
This material has 48 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
CSA 60W Chemical Composition
G40.21: 2013 / Structural quality steel
Looking for full material performance data?
Free registration required • Instant access
CSA 60W Physical Properties
Temperature
This material has 48 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
CSA 60W Heat Treatments
- Normalizing - a process that involves re-heating as-rolled steel plate to a temperature above the upper transformation temperature (approximately 830 to 900° (1525 to 1650°F), and cooling it in still air. Normalized steels are denoted “N” and are applicable to steel plate.
Quenching and tempering: steel shall be heat treated by quenching and tempering to conform to the mechanical properties required by. Quenching shall be accomplished by uniformly heating the steel to not less than 900°C (1650°F) and then cooling it by liquid immersion or liquid sprays to a temperature less than 320°C (600°F). The steel shall be tempered by uniformly reheating it to a suitable temperature not less than 595°C (1100°F), or as stipulated on the product specification, and then cooled in air or quenched. The heat-treating temperature shall be reported on the test certificates, if required.
CSA 60W Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
CSA 60W International Equivalent Materials
Showing 7 of 17 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 17 international equivalents?
See all 17 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 17Cross References
- 8Composition
- 12Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 7Total Suppliers