ASME SA-543 Type B Class 1 Structural and constructional steels
Data updates
This material has 135 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-543 Type B Class 1 Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications / American Society of Mechanical Engineers / 2025
Looking for full material performance data?
Free registration required • Instant access
ASME SA-543 Type B Class 1 Physical Properties
Temperature
This material has 135 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-543 Type B Class 1 Heat Treatments
- All plates shall be heat treated by heating to a suitable austenitizing temperature, holding for a sufficient period of time to attain uniform temperature throughout the thickness, and quenching in a suitable liquid medium by spraying or immersion. The plates shall then be tempered to produce the required properties by heating to a suitable temperature not lower than 595°C (1100°F) with a holding time of not less than 1.2 min/mm of thickness but not less than 0.5 hour.
Plates over 100 mm in thickness shall receive a prior heat treatment of normalizing at, or water quenching from, a temperature within the range from 900 to 1010°C (1650 to 1850°F) before final heat treatment.
ASME SA-543 Type B Class 1 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
Optimize material selection for your application - Book a Demo
-
10 Cross References
-
8 Composition
-
38 Mechanical Properties
-
5 Physical Properties
-
1 Heat Treatment
-
- Metallography
-
- Machinability
-
- Stress-Strain
-
- Formability
-
- Fatigue
-
- Fracture
-
33 Creep
-
- Joints
-
- Coatings
-
34 Dimensions
-
- Tribology
-
- Corrosion
-
- Ageing
-
- Weatherability
-
- Irradiation
-
6 Total Suppliers