ASME SA-557 Grade C2 Structural and constructional steels
Data updates
This material has 159 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-557 Grade C2 Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 2019
Looking for full material performance data?
Free registration required • Instant access
ASME SA-557 Grade C2 Physical Properties
Temperature
This material has 159 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-557 Grade C2 Heat Treatments
- Following welding, tubes shall be normalized at a temperature of at least 860°C (1600°F) followed by cooling in air or cooling in the cooling zone of continuous atmosphere controlled furnace.
If cold drawn, tubes shall be heated after the final cold-working operation to a temperature of at least 640°C (1200°F) to ensure ductility satisfactory for rolling into tube sheets and to meet the specified mechanical properties.
If heat treatment of the U-bends is specified, such heat treatment shall consist of heating the stressed portion within a range from 590 to 640°C (1100 to 1200°F).
ASME SA-557 Grade C2 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME SA-557 Grade C2 International Equivalent Materials
Showing 1 of 5 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 5 international equivalents?
See all 5 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 5Cross References
- 4Composition
- 39Mechanical Properties
- 83Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 1Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 18Creep
- -Joints
- -Coatings
- 8Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers