ASME SA-533 Type A Class 3 Structural and constructional steels
Data updates
This material has 210 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-533 Type A Class 3 Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 2025
Looking for full material performance data?
Free registration required • Instant access
ASME SA-533 Type A Class 3 Physical Properties
Temperature
This material has 210 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-533 Type A Class 3 Heat Treatments
- All plates shall be heat treated by heating to a suitable temperature within the range of 845 to 980°C (1550 to 1800°F), holding for a sufficient time to obtain uniform temperature throughout the plate thickness and then quenching in water. Subsequently the plates shall be tempered at a suitable temperature to produce the specified properties, but not less than 595°C (1100°F) with a minimum holding time of 1.2 min/mm of thickness, but not less than 30 min.
ASME SA-533 Type A Class 3 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME SA-533 Type A Class 3 International Equivalent Materials
Showing 13 of 15 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 15 international equivalents?
See all 15 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 15Cross References
- 6Composition
- 38Mechanical Properties
- 83Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 1Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 22Creep
- -Joints
- -Coatings
- 34Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 10Total Suppliers