ASME SA-533 Type C Class 2 Structural and constructional steels
Data updates
This material has 533 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-533 Type C Class 2 Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications / American Society of Mechanical Engineers / 2025
Looking for full material performance data?
Free registration required • Instant access
ASME SA-533 Type C Class 2 Physical Properties
Temperature
This material has 533 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-533 Type C Class 2 Heat Treatments
- All plates shall be heat treated by heating to a suitable temperature within the range of 845 to 980°C (1550 to 1800°F), holding for a sufficient time to obtain uniform temperature throughout the plate thickness and then quenching in water. Subsequently the plates shall be tempered at a suitable temperature to produce the specified properties, but not less than 595°C (1100°F) with a minimum holding time of 1.2 min/mm of thickness, but not less than 30 min.
ASME SA-533 Type C Class 2 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
Optimize material selection for your application - Book a Demo
-
177 Cross References
-
7 Composition
-
38 Mechanical Properties
-
66 Physical Properties
-
1 Heat Treatment
-
- Metallography
-
- Machinability
-
- Stress-Strain
-
- Formability
-
- Fatigue
-
- Fracture
-
42 Creep
-
- Joints
-
- Coatings
-
34 Dimensions
-
- Tribology
-
- Corrosion
-
- Ageing
-
- Weatherability
-
- Irradiation
-
168 Total Suppliers