ASME SA-508 Class 2A Structural and constructional steels
Data updates
This material has 43 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-508 Class 2A Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 1992
Looking for full material performance data?
Free registration required • Instant access
ASME SA-508 Class 2A Physical Properties
Temperature
This material has 43 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-508 Class 2A Heat Treatments
- The forgings shall be heated to a temperature which produces an austenitic structure and then quenched in a suitable liquid medium by spraying or immersion. Quenching shall be followed by tempering at a subcritical temperature and holding at this temperature for a minimum time of one-half hour per 25.4 mm of maximum section thickness. Тhe minimum tempering temperature shall be 620°C (1150°F). When required, the minimum tempering temperature shall be 635°C (1175°F) and the simulated post weld heat treatment temperature shall not exceed 620°C (1150°F).
ASME SA-508 Class 2A Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME SA-508 Class 2A International Equivalent Materials
Showing 9 of 24 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 24 international equivalents?
See all 24 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 24Cross References
- 9Composition
- 5Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 1Total Suppliers