ASME SA-249 TP 347 Stainless steels

Material group: Ferrous Alloys / Stainless steels
Country / Standard: United States / ASME

Data updates

Latest Update: 2024-02
Total number of updates: 5
Update History
2024-01 2023-11 2023-10 2016-02

This material has 2623 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

ASME SA-249 TP 347 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
≤ 0.08
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
17.0 – 19.0
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Mn
VALUE
≤ 2.00
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Nb
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-03-1
CRITERIA
Ni
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-02-0
CRITERIA
P
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3

ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 2025

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

ASME SA-249 TP 347 Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
179.6 — 215 GPa
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
val1
Full data available with free access View Complete Material Data
W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
val1
Full data available with free access View Complete Material Data
Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Heat Capacity
val1
Full data available with free access View Complete Material Data
J/(kg∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Melting Temperature
val1
Full data available with free access View Complete Material Data
°C
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Shear Modulus
val1
Full data available with free access View Complete Material Data
GPa
Unlock full details
Full data available with free access View Complete Material Data
Coefficient of Thermal Expansion (CTE)
val1
Full data available with free access View Complete Material Data
10-6/°C
Unlock full details
Full data available with free access View Complete Material Data

This material has 2623 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

ASME SA-249 TP 347 Heat Treatments

  • Solution heat treated at min 1040°C (1900°F). A solution treating temperature above 1065°C (1950°F) may impair resistance to intergranular corrosion after subsequent exposure to sensitizing conditions. When specified by the purchaser, a lower temperature stabilization or re-solution anneal shall be used subsequent to the higher-temperature solution anneal prescribed. Quenched in water or rapidly cooled by other methods. When stress-relieved tubes are specified, tubes shall be given a heat treatment at 845-900°C (1550-1650°F) after roll straightening. Cooling from this temperature range may be either in air or by slow cooling. No mechanical straightening is permitted after the stress-relief treatment.

ASME SA-249 TP 347 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 515 MPa
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
val1
Full data available with free access View Complete Material Data
%
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data
Impact Energy
val1
Full data available with free access View Complete Material Data
J
Unlock full details
Full data available with free access View Complete Material Data
Reduction of Area
val1
Full data available with free access View Complete Material Data
%
Unlock full details
Full data available with free access View Complete Material Data
Rockwell Hardness (HR)
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Vickers Hardness (HV)
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

ASME SA-249 TP 347 International Equivalent Materials

Showing 15 of 858 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
30347
STANDARD
SAE
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
347
STANDARD
SAE
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
S34700
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
347
STANDARD
AISI
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
A 580 Type 347
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
A 430 FP 347
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
A 511 MT347
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
A 312 TP347
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
A 403 WP347
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
A 240 Type 347
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
A 313 Type 347
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
A 213 TP347
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
A 249 TP347
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
A 269 TP347
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
A 409 TP347
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 858 international equivalents?

See all 858 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 858Cross References
  • 8Composition
  • 618Mechanical Properties
  • 413Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • 1Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • 176Creep
  • 33Joints
  • -Coatings
  • 54Dimensions
  • -Tribology
  • 346Corrosion
  • 2Ageing
  • -Weatherability
  • -Irradiation
  • 113Total Suppliers